SCREENS: Polyester LE Mesh

With a patented low-elongation thread and weaving process, Murakami imports
some of the best screen printing mesh available from Nittoku Mills in Japan.
SmartMesh out-performs in consistency and durability. Prices are per yard at a 60/62" width.
M.O.=Mesh Opening in Microns      O.A.=Percentage Open Area
 Quantity discount applied in shopping cart. (Factory Bolts are approx. 30 yards)

These specific mesh counts are special versions of the standard ones shown above.
Each count listed below is woven with a thread that is approx. 20% finer than the one which is normally used.
As a result, the % open area of the mesh is dramatically larger, permitting much better ink flow.
Not only can this mesh provide better results with image resolution, edge definition, and ink deposit,
but it can do it at lower mesh tensions than normally needed.
  Quantity discount applied in shopping cart. (Factory Bolts are approx. 30 yards)

Read about the "S" Thread Mesh Advantage
Thin Thread Technical News Letter

This is a specially made film test pattern that can tell you the correct mesh count for a screen that's not marked.
 Two different scales are used for monofilament fabric, one for mesh counts from 100 to 240, the other for counts from 200 to 480.
There is also a third test image for 55dpi to 200dpi halftone dot patterns that effectively tells you how many halftone dots-per-inch.
Directions for use:
Place the test pattern film on your screen face down and pivot on the mesh surface;
a wide "bar pattern" forms that centers on the actual mesh count in question;
read the number that's listed to the side of that bar for that screen's mesh count.