Adhesive Powders for Heat Transfers (1 pound)
11H Fine, 11L Medium, 11E Coarse
You may also like:
Heat Transfer- SuperTrans Paper
From $17.50 to $165.00
Welcome to Our Online Store! AdvancedScreenPrintSupply.com
Adhesive Powders for Heat Transfers (1 pound)
11H Fine, 11L Medium, 11E Coarse
Polyamide Hot Melt Powders:
11H Fine Grain- 10/80 Micron size. Ideal for transfer ink mixing or use to enhance foil adhesive ink.
11E Coarse Grain- 100/300 Micron size. Best for broadcasting/dusting only. Leaves less residue on paper.
11L Medium Grain- 60/200 Micron size. Made for multipurpose demands. Most similar to ULON-2027.
Application methods:
Sprinkle powder adhesive on wet ink using a salt type shaker or fill a square container (box) with the powder adhesive, at least 1/4” to 1/2" deep, and pass the printed and wet transfer (print side up) through the container of powder adhesive. The powder adhesive will adhere to the wet ink. When applying the powder adhesive by hand, remove excess powder adhesive from unprinted areas of the transfer sheet before running through the dryer by shaking or by slightly thumping/beating the transfer paper from the non-printed side of the transfer paper with fingers.
Copyright © Advanced Screen Technologies, Inc. All Rights Reserved